69
Bluetooth mode
The Bluetooth mode on your sound system allows you to play audio, play sound from video fi les and stream music from Bluetooth capable devices
such as your moblie phone, computer, tablet etc. through your sound system's loudspeakers.
● When a Bluetooth enabled device such as your Stream 65i sound system is in a discoverable state other Bluetooth devices can detect, pair with or connect
to it.
● 'Bluetooth pairing' occurs when two Bluetooth enabled devices agree to establish a connection and communicate with each other.
Connecting Bluetooth devices
1. Ensure that the Bluetooth capability on your phone, tablet or PC is enabled.
You may need to refer to the user documentation for your device, since
the method will vary with each device.
2. Press and release the On/Standby button to switch on the sound system.
3. Press the Media button on your sound system until the Bluetooth mode
is selected. Your sound system will show that it is discoverable and will
show 'No Connect...' on the display.
4. Using the Bluetooth settings of your phone, tablet or PC direct it to search
for discoverable devices. After a few seconds, you should see a device
named 'Stream-65i'. Just occasionally it may take longer for the sound
system to be found by your device.
5. Select 'Stream-65i' to cause your phone, tablet or PC to pair with your
sound system and to establish a connection.
6. Once the connection is established, a message will be displayed confi rming
the name of the connected device.
You can now begin playing music from your smart-phone, tablet, etc.
Some Bluetooth devices may require a 'Passkey' (an authentication key) in
order to establish a link between devices. A passkey is similar to a password,
although you only need to use the passkey once to establish a link. If your
device asks for a passkey to be able to pair with your sound system then enter
a code of 0000 (four zeroes).
2
3
12:34
Julia’s iPod touch
Playing
Bluetooth
Bluetooth
To Next Page
Loading...
