94
Clock and Alarms
Setting the alarm clock
Your sound system has two separate alarms which can be set to wake you to either the radio, CD, USB, SD or
a buzzer alarm. In the event of a power interruption your sound system has built in memory that will retain your
alarm settings. Ensure that the time is set correctly before setting the alarms.
Alarms may be set while the sound system is in standby mode or switched on.
If your sound system is being used as part of a multi-room system, please also see 'Alarm and Multi-room' page 108.
SD
Bluetooth
Aux in
Sleep
Alarms
System settings
Main menu
1
07:30
2
08:30
4
1-3
3-7 3-7
3
3-7
Alarm 1: Off [00:00]
Alarm 2: Off [00:00]
Alarms
Enable: Off
Time: 00:00
Mode: Buzzer
Volume: 20
Save
Alarm 1
07 : 00
Alarm 1 time
1. To change the states of the alarms while the sound system is in Standby press
the Alarm button. The display will cycle through No Alarm, Alarm 1 enabled,
Alarm 2 enabled or Alarms 1 and 2 enabled.
2. To change the alarm settings while the sound system is in Standby, press and
hold the Alarm button. This will cause the Alarms menu to be displayed. Then
skip to step 5 below.
3. To change the alarm settings while the sound system is switched on, either press
and release the Alarm button and then skip to step 5 below, or alternatively
press and hold the Menu button to access the menu for the current mode.
Press the Menu Up or Down buttons until 'Main menu' is highlighted on the
display. Press and release the Select button to enter the Main menu.
4. Press the Menu Up or Down buttons until 'Alarms' is highlighted on the display.
Press and release the Select button to see the current alarm settings. If no
change is required, press the Back button to exit.
5. Press the Menu Up or Down buttons until the desired alarm (1 or 2) is highlighted
on the display. Press and release the Select button to enter alarm setup.
6. Press the Menu Up or Down buttons until 'Time' is highlighted on the display.
Press and release the Select button to adjust the alarm time.
7. Press the Menu Up or Down buttons to choose the alarm hour. Press and
release the Select button to confi rm the setting.
To Next Page
Loading...
