39
Finding new DAB radio stations
Should you wish to use your sound system for DAB reception in a new
location, or if no stations were detected during the initial scan, you can
follow this procedure to allow your sound system to fi nd out which DAB
radio stations are available.
1. Ensure that the telescopic antenna is extended, and then press the
Radio button as needed to select DAB Radio mode.
2. Once in DAB mode press and hold the Menu button.
3. Press the Menu Up or Down buttons until 'Scan' is highlighted on the
display.
4. Press and release the Select button to initiate the scan. The display
will show 'Scanning' and your radio will perform a scan of the Band III
DAB frequencies. As new stations are found the station counter will
increase and stations will be added to the list. The bar graph indicates
the progress of the scan.
5. Alternatively press the Auto Tune button on the remote control to
initiate a scan of the DAB Band III frequencies.
The Auto Tune button may not operate in all display modes. In this
case use the menu option above.
1
33
2
4
5
Station list
Scan
Manual tune
Prune invalid
DRC
Station order
DAB
Scan
Stations: 24
Scanning
To Next Page
Loading...
