74
CD / MP3 / WMA
Inserting a CD
Ensure the CD player is empty before inserting a disc. If there is a disc in the player
then the CD loaded indicator will be lit. If you cannot insert a disc, press the CD
Eject button to remove the CD currently in the player.
1. Press and release the On / Standby button to switch on your sound system.
2. To select the CD mode press the Media button until 'CD' shows on the display
or insert an audio CD.
3. To eject a CD press and release the CD Eject button. To reload a CD that has
just been ejected, press the Eject button a second time.
4. Insert a disc with printed side facing up into the CD slot. The disc will be loaded
automatically. The unit will check the CD type and load its track list. The display
will show 'Loading' and then 'Reading' as the information is read.
5. If you load a disc containing MP3 or WMA fi les your sound system will enter the
MP3 / WMA mode (see page 78).
Playing a CD
1. Press the Play / Pause button to start playing the disc. The display will show
the fi rst track number.
2. Adjust the Volume to the required setting.
3. To pause playing press the Play / Pause button. To resume press the Play /
Pause button again.
4. To stop playback, press the Stop button.
5. If you put the unit into standby mode then the next time the unit is switched on
it will return to the previously played track.
1
2
3
1,3
4
CD
12:34
Reading
CD
12:34
T001 00:15
Playing
CD
12:34
T001 00:15
Pause
CD
12:34
T015 64:44
Stop
To Next Page
Loading...
