Roberts Stream 65i - Clear Network Settings

119
Clear network settings
In the event that you pass your sound system on to someone else you
may wish to remove all the network settings stored. This function will clear
all stored network settings from your sound system.
1. Access the menu for the current mode, press and hold the Menu
button. Press the Menu Up or Down buttons until 'System settings'
is highlighted on the display. Press and release the Select button to
enter the settings menu.
2. Press the Menu Up or Down buttons until 'Network' is highlighted on
the display. Press and release the Select button to enter the Network
settings menu.
3. Press the Menu Up or Down buttons until 'Clear network settings' is
highlighted on the display. Press and release the Select button.
4. The sound system will offer a 'YES' or 'NO' selection. Press the Menu
Up or Down buttons to select 'YES' and then press and release the
Select button. The network settings will be deleted.
5. If you do not wish to clear the network settings, highlight 'NO' and
then press and release the Select button. The display will revert to
the previous menu.
SD
Bluetooth
Aux in
Sleep
Alarms
System settings
Main menu
Backlight
Equaliser
Network
Time/Date
Inactive Standby
Language
System settings
View settings
Wlan region
Manual settings
NetRemote PIN Setup
Network profile
Clear network settings
Network settings
1-4 1-4
1
1-5
Network settings
Clear network settings?