Roberts Stream 65i - Stereo; Mono Switching

48
Stereo / Mono switching
If the FM radio station being listened to has a weak signal, some hiss may
be audible. It is possible to reduce this hiss by forcing the sound system
to play the station in mono rather than stereo.
1. Press the Radio button as needed to select the FM Radio mode display
and tune to the required FM station as previously described.
2. Press and hold the Menu button to enter the FM menu.
3. Press the Menu Up or Down buttons until 'Audio setting' is highlighted
on the display. Press and release the Select button to enter the audio
setting mode.
The current setting is indicated with an asterisk.
4. To switch to mono in order to reduce the hiss from a weak FM signal
press the Menu Up or Down buttons until 'YES' is highlighted. Press
and release the Select button to confi rm the setting.
Alternatively, to return to the normal automatic 'stereo or mono' mode
press the Menu Up or Down buttons until 'NO' is highlighted. Press
and release the Select button to confi rm the setting.
5. Press the Back button to return to the normal FM mode display.
FM R adio
FM
radio
1
3,4 3,4
2
3,4
Scan setting
Audio setting
System settings
Main menu
FM
FM weak reception
Listen in Mono only?
FM weak reception
Listen in Mono only?
YES NO
FM Radio