9.2. RECOMMENDED SPARE PARTS LIST
List of the spare parts that wear easily and that should be always available to avoid long machine downtimes:
- Drive chain.
- Drive belt.
- Idle pulley bushings.
- Sliding guide shoes.
To order them, contact your local dealer and refer to the spare parts catalogue.
Important
Replace worn parts with original spare parts.
Use oils and greases recommended by the Manufacturer.
All the above will ensure the proper operation of the machine and the correct level of safety.
9.3. MACHINE DECOMMISSIONING AND SCRAPPING
9.3.1. MACHINE DECOMMISSIONING
- Cut off any supply to the machine (power, pneumatic, etc.) so that it cannot be restarted and position it in a
place that cannot be easily accessed.
- Empty the systems, which contain hazardous substances, in a proper manner and in compliance with the laws
in force at workplaces and with those on environmental protection.
9.3.2. MACHINE SCRAPPING
- Scrapping must be performed by authorised centres with experienced personnel and by using the appropriate
equipment for safe operating conditions.
- The person who performs the scrapping must identify any possible residual energies and implement a “safety
plan” to eliminate unexpected risks.
- The components must be selected according to the chemical and physical features of the material and disposed
of separately, in accordance with the applicable laws.
- Empty the systems, which contain hazardous substances, in a proper manner and in compliance with the laws
in force at workplaces and with those on environmental protection.
To Next Page
Loading...
