6.6. EMERGENCY STOP AND RESTART (ECOWRAP PLUS)
Proceed as follows.
1. Press the emergency button (A) of the machine in situations of imminent risk.
Its functions stop immediately.
2. After setting the working conditions back to normal, release the button to allow the machine to resume operation.
3. Press the “Reset” button (G).
4. Turn the selector (D) to the function (F8).
5. Press and hold selector (D) to move the rotary arm to the cycle start position.
6. Repeat all automatic cycle starting operations (see “Cycle start and stop”).
To Next Page
Loading...
