Robopac MASTERWRAP PLUS XL FR - PERIODIC MAINTENANCE SCHEDULE

94
MAINTENANCE INFORMATION
ENG
7.2. PERIODICAL MAINTENANCE INTERVALS
Important
Keep the machine in maximum efficiency conditions and perform all the scheduled maintenance
operations provided for by the Manufacturer.
Proper maintenance will provide the best performance, a longer life span and constant compliance with
safety requirements.
Maintenance interval table
Frequency
Component
Type of
intervention
Intervention mode
Reference
Every 30 days
Machine
Cleaning
Clean with a cloth or air
jet
-
Rubber roller
Cleaning
Clean with a cloth or air
jet
-
General check
Remove any film
fragments
-
Sliding guide
shoes
Lubricate
Use spray grease or
spray silicone oil
Every 2000
cycles or every
month
Braking disc
Cleaning
Use a cloth.
If noisy, slightly
lubricate with spray oil
and dry with a cloth
-
Arm rotation chain
General check
Check tension and
adjust, if necessary
See “Wrapping
machine arm drive
chain tension
adjustment”
Lubricate
-
See “Lubrication point
diagram”
Carriage
movement belt
General check
Check tension and
adjust, if necessary
See “Film carriage belt
adjustment”
Drag chain
General check
Check correct fastening
and operation
-
Carriage screw
tightening
General check
Check the tightening of
the screws on the film
carriage axis, tailstock,
rubber roller, knob and
release lever.
-