2.8. INFORMATION AND SAFETY SIGNS
The figure indicates the position of the safety and information signs affixed to the machine.
For each sign the relative description is specified.
1. Danger sign
Risk of body crushing.
2. Electrical hazard sign
Do not access the area to avoid risks of electric shock or electrocution.
3. Obligation sign
It indicates the obligation, before using the machine, to read all the parts of the documentation.
4. Prohibition sign
It is forbidden to stand or transit in the operating area.
5. Prohibition sign
Do not touch the area to avoid risks of burns.
6. Information sign
It indicates the lifting points with hook device.
7. Information sign
It identifies the electric cut-out.
8. Information sign
Brake release symbol.
9. Information sign
Machine Stop symbol.
10. Information sign
Machine Start symbol.
11. Information sign
Machine Reset symbol.
Important
Make sure that the nameplates are clearly legible.
If not, replace and reposition them at the original position.
To Next Page
Loading...
