Robopac MASTERWRAP PLUS XL FR - RECOMMENDED LUBRICANT SPECIFICATIONS

ENG
MAINTENANCE INFORMATION
97
7.4. LUBRICANT TABLE
The table below lists the specifications of the lubricants recommended by the Manufacturer for each component and/or
reference area.
Use lubricants (oils and greases) recommended by the Manufacturer or with similar chemical-physical features.
Lubricant characteristics
Lubricant type
Code
Parts to be lubricated
Mineral oil
23°C / 50°C - 320 CST 40°C
MELLANA OIL 320 IP
SPARTAN EP 320 ESSO
BLASIA 320 AGIP
MOBILGEAR 632 MOBIL
OMALA EP 320 SHELL
ENERGOL GR-XP 320 BP
Gear reduction unit and worm screw
reduction unit
Grease
TELESIA COMPOUND B IP
STRUCTOVIS P LIQUID KLUBER
TOTALCARTER SYOO TOTAL
Gear reduction unit and worm screw
reduction unit
Synthetic oil
TELESIA OIL IP
SYNTHESO D 220 EP KLUBER
BLASIA S 220 AGIP
Gear reduction unit and worm screw
reduction unit
Lithium grease
TELESIA OIL IP
SYNTHESO D 220 EP KLUBER
BLASIA S 220 AGIP
Bearings with support
Synthetic oil
+25°C / +45°C VG 150 (SAE 40)
+45°C / +70°C VG 220 (SAE 50)
Drive chain
Important
Do not mix together oils of different brands or having different characteristics.