Meter Setup
79
1 From the Main Menu, touch Setup.
2 From the Setup menu, touch Lockout.
3 From the Setup-Lockout menu, touch
STAT Test Config.
4 Touch Enable to allow STAT Tests or:
Touch Disable to prohibit STAT Tests.
Your selection is now highlighted.
5 If you have enabled the option, touch
and to set the number of additional
tests.
6 Touch to save this setting, or:
Touch to exit this menu without saving
any changes.
The display automatically returns to the
previous screen.
Main Menu
11/24/2009
09:15 am
QC Test
Memory
Setup
Patient TestQC!
09:15 am
Data Handling
ID Setup
Lockout
Basics
Optional Screens
Setup
09:15 am
QC Settings
Cleaning Lockout
STAT Test Config.
Operator Lockout
Setup - Lockout
09:15 am
Disable
Enable
Quantity:
3
STAT Test
To Next Page
Loading...
