38 Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021
Chapter 2 Configure the Terminal
2. Press Display.
3. Press Font.
4. Select the font, then press Delete.
Change the Error Alert Display Settings
You can set the error alert display behavior from the terminal. You can choose
to enable or disable an error alert independent of the application setting or you
can use the application setting for displaying an error alert.
Follow these steps to change the error alert display settings from the terminal.
IMPORTANT
The Korean language font “Gulim” is treated as a system font. After
downloading it to the terminal and restarting the terminal, you can
switch the terminal language to Korean by selecting it from the main
configuration screen. See Select a Terminal Language
on page 19. The
“Gulim” font will not appear in the Font screen and cannot be deleted
unless you restore or return the terminal to out-of-box condition.
IMPORTANT
Make sure that the application is not running before you make any
changes.
We recommend that you enable error alerts to allow diagnostics and
communications error messages to display.
Display
Back
Brightness
Orientation (Requires Reset)
Calibrate Touchscreen
Screen Saver
Font
100
0 degrees
Font
Back
Delete
calibri.ttf
gara.ttf
segoeui.ttf
To Next Page
Loading...
Need help?
General
