Rockwell Automation Publication 1426-UM001J-EN-P - August 2019 175
Logging Chapter 6
Power Quality Log Results
Power quality log records can be retrieved in a file from the PowerMonitor 5000
web page or FTP server. The link for the power quality log is found in the
LoggingResults.General_Logs tab in the web page.
To retrieve the file, click the link and follow the prompts to save or open the file.
The FTP server works in a similar way.
Records can also be retrieved sequentially through the native Ethernet network
communication or an optional communication port by using the data table
interface. A read of the Statistics.Logging
table, on page 365, returns the number
of power quality log records in Element 15.
Select the power quality log and the desired order of record retrieval by writing
values to these tags in the Configuration.Log_Read
table on page 326.
• Selected Log = 10, Power Quality Log
• Chronology of Auto Return Data = 0 for most recent first (default), 1 for
earliest first
Successive reads of the LoggingResults.Power_Quality_Log (M6 and M8 model)
table, on page 394
, return records in the selected sequence. After the last record is
read, the next read starts again from the end or beginning of the log as was
selected.
Commands
Clear power quality log
To Next Page
Loading...
