206 Rockwell Automation Publication 1426-UM001J-EN-P - August 2019
Chapter 7 Logic Functions
Setpoint and Logic Gate Status
Setpoint status is reported in the following tags, found in the Status.Alarms table
on page 348
.
Setpoints_1_10_Active
Bit 0 = Setpoint1_Active (0 = False, 1 = True)
Bit 1 = Setpoint2_Active
…
Bit 9 = Setpoint10_Active
Setpoints_11_20_Active (M6 and M8 models)
Bit 0 = Setpoint11_Active (0 = False, 1 = True)
Bit 1 = Setpoint12_Active
…
Bit 9 = Setpoint20_Active
Logic_Level_1 Gates_Active (M6 and M8 models)
Bit 0 = Level1_Gate1_Active (0 = False, 1 = True)
Bit 1 = Level1_Gate2_Active
…
Bit 9 = Level1_Gate10_Active
Setpoint and Logic Gate Statistics
Setpoint statistics are reported in the Statistics.Setpoint_Output table on
page 362
, which includes the following information tags for each setpoint.
Setpoint n Seconds Accumulator
Setpoint n Minutes Accumulator
Setpoint n Hours Accumulator
Setpoint n Transitions to Active x1
Setpoint n Transitions to Active x1000
Logic gate statistics are reported in the Statistics.Setpoint_Logic Data Table on
page 366
, which reports the information that is listed Setpoint and Logic Gate
Status for each logic gate.
To Next Page
Loading...
