37
Using the JUPITER-Xs Speakers to Hear
Music from a Mobile Device
Registering a Mobile Device (Pairing)
“Pairing” is the procedure by which the mobile device that you
want to use is registered on this unit (the two devices recognize
each other).
Make settings so that music data saved on the mobile device can
be played wirelessly via this unit.
MEMO
5 Once a mobile device has been paired with this unit, there is no need to
perform pairing again. If you want to connect this unit with a mobile device
that has already been paired, refer to “Connecting an Already-Paired Mobile
Device” (p. 37).
5 Pairing is required again if you execute a Factory Reset (p. 49).
5 The following steps are one possible example. For details, refer to the owner’s
manual of your mobile device.
1. Place the mobile device that you want to connect
nearby this unit.
2. Press the [MENU] button.
The MENU screen appears.
3. Use the [1] knob to select “SYSTEM.”
You can also make this selection by using the PAGE [ ] [ ]
buttons instead of the [1] knob.
4. Press the [ENTER] button.
The SYSTEM screen appears.
5. Use the [1] knob to select “Bluetooth Sw,” and then
use the [2] knob to turn it “ON.”
MEMO
To save the setting, perform the system write operation.
& “Saving the System Settings
(System Write)” (p. 43)
6. Use the [1] knob to select “Pairing,” and then press
the [ENTER] button.
The display indicates “PAIRING...,” and this unit waits for a
response from the mobile device.
7. Turn on the Bluetooth function of the mobile device.
MEMO
The explanation here uses the iPhone as an example. For
details, refer to the owner’s manual of your mobile device.
8. Tap “JUPITER-X Audio” that is shown in the Bluetooth
device screen of your mobile device.
This unit is paired with the mobile device. When pairing
succeeds, “JUPITER-X Audio” is added to the list of “Paired
Devices” on your mobile device.
9. Press the [MENU] button when you’re nished
making settings.
Connecting an Already-Paired Mobile
Device
1. Turn on the Bluetooth function of the mobile device.
2. Turn on the JUPITER-X’s Bluetooth function.
2-1. Press the [MENU] button.
2-2. Use the [1] knob to select “SYSTEM,” and then press
the [ENTER] button.
2-3. Use the [1] knob to select “Bluetooth Sw,” and then
use the [2] knob to turn it “ON.”
MEMO
5 If you were unable to establish a connection using the procedure above, tap
“JUPITER-X Audio” that is displayed in the Bluetooth device screen of the
mobile device.
5 To disconnect, either turn this unit’s Bluetooth Audio function “OFF” (SYSTEM
parameter’s setting 0 turn “Bluetooth Sw” OFF) or turn the mobile device’s
Bluetooth function o.
Playing Music from the Mobile Device
1. Connect the mobile device via Bluetooth.
2. On the mobile device, use a music app to play back
music.
The sound is heard from the JUPITER-X.
* To adjust the playback volume, adjust the volume on your mobile device
or adjust the System setting “AuxIn/BT InLev.”
Using the JUPITER-X to Control a Mobile
Device
Here’s how to make settings for transmitting and receiving MIDI
data between this unit and the mobile device.
Using the JUPITER-X as a MIDI Keyboard for
a Music App
You can use the keyboard of this instrument to play a music app
that supports Bluetooth MIDI.
Transferring MIDI Data
Here’s how to make settings for transmitting and receiving MIDI
data between this unit and the mobile device.
1. Place the mobile device that you want to connect
nearby this unit.
MEMO
If you have more than one unit of this model, power-on only
the unit that you want to pair (power-o the other units).
2. Turn on the Bluetooth function of the mobile device.
MEMO
The explanation here uses the iPhone as an example. For
details, refer to the owner’s manual of your mobile device.
3. In the mobile device’s app (e.g., GarageBand),
establish a connection with this unit
NOTE
Do not tap the “JUPITER-X MIDI” that is shown in the Bluetooth
settings of the mobile device.
Using the Bluetooth® Functionality
To Next Page
Loading...
Need help?
Power
Sound and Effects
Weight and Dimensions
