Roland JUPITER-X - Differentiating Multiple JUPITER-X Units (Bluetooth ID); Disabling the Bluetooth Functionality

38
Using the Bluetooth® Functionality
Dierentiating Multiple JUPITER-X Units
(Bluetooth ID)
You can specify a number that is added following the device
name of this unit when it is displayed by a Bluetooth connected
application.
If you own multiple units of the same instrument, this is a
convenient way to distinguish them.
1
2
3
Pair with this JUPITER-X
1. Press the [MENU] button.
The MENU screen appears.
2. Use the [1] knob to select “SYSTEM,” and then press
the [ENTER] button.
You can also make this selection by using the PAGE [ ] [ ]
buttons instead of the [1] knob.
3. Use the [1] knob to select “Bluetooth ID.”
4. Use the [2] knob to change the setting.
Parameter
[1] knob
Value
[2] knob
Explanation
Bluetooth ID
OFF,
1–9
Specify the digit added to the end of this
unit’s device name that will be shown in the
Bluetooth-connected app.
Set to “OFF”: “JUPITER-X Audio,” “JUPITER-X
MIDI” (default)
Set to “1”: “JUPITER-X Audio 1,” “JUPITER-X
MIDI 1”
5. To save the setting, press the [WRITE] button.
6. Press the [MENU] button when you’re nished
making settings.
Disabling the Bluetooth Functionality
Disable the Bluetooth functionality if you don’t want this unit to be
connected via Bluetooth with your mobile device.
1. Press the [MENU] button.
The setting screen appears.
2. Use the [1] knob to select “SYSTEM,” and then press
the [ENTER] button.
You can also make this selection by using the PAGE [ ] [ ]
buttons instead of the [1] knob.
3. Use the [1] knob to select “Bluetooth Sw.”
4. Use the [2] knob to turn the setting “OFF.”
5. To save the setting, press the [WRITE] button.
6. Press the [MENU] button when you’re nished
making settings.