Roland JUPITER-X Reference Manual

53
Q&A
06 Do the internal speakers produce enough
volume for a live performance?
They are not suitable for this purpose.
The internal speakers are intended for personal enjoyment by the
individual who is playing the instrument. For use in a live performance,
we recommend that you connect an external amp or speaker.
Operating the Unit
07 Why do the panel knobs and buttons work
sometimes and not at other times?
The parameters are dierent for each model, so there are cases in
which a controller has no parameter. Since the controllers without
a parameter dier between models, a controller might or might not
have an eect.
The parameter that is controlled by each knob or button will dier
depending on the model used by the tone that’s assigned to the
current part (the currently selected part).
& “Correspondence Between Controllers and Parameters”
(p. 29)
08 Is there a way to move quickly to the edit
screen for the parameter controlled by each
knob?
Yes.
1. Hold down the [SHIFT] button and turn the knob of
the parameter that you want to edit.
The setting screen appears.
& “Correspondence Between Controllers and Parameters”
(p. 29)
09 Is there a way to check the current value of
a setting without aecting the state of the
sound?
Yes.
1. Hold down the [EXIT] button and operate the knob
that you want to check.
The current value of the setting is shown.
10 Is there a way to quickly change the
PORTAMENTO TIME?
Yes.
1. Hold down the [SHIFT] button and press the
[PORTAMENT] button.
The PORTAMENT TIME setting screen appears.
2. Use knob [2] to edit the PORTAMENTO TIME.
11 The part on/o button is lit, but I can’t play the
sound of that part from the keyboard.
(Buttons [6]–[9] when the [PART] button is lit)
This might be due the following reasons.
5 The part might be assigned for arpeggio performance
5 The I-ARPEGGIO [ON/OFF] button is ON, and the ARPEGGIO PART EDIT
parameter Switch is “ON” or “KEYSW”
&“If the Keyboard Does Not Play Sound” (p. 19)
12 Is there a way to move quickly to the TONE
(PARTIAL) edit screen?
Yes.
1. Hold down the [SHIFT] button and operate the
[OSC 1]–[OSC 4] sliders.
The edit screen for the corresponding tone or partial appears.
13 Is there a way to move quickly to the
assignment screen for the [SL1/2] sliders or [S1/
S2/S3] buttons?
Yes.
1. Hold down the [SHIFT] button and operate the slider
or button that you want to assign.
The assignment screen for the corresponding controller
appears.
14 Can I change the models or categories that are
recalled by the MODEL buttons [1]–[16]?
Yes.
1. Hold down the [MODEL BANK] button and press a
MODEL button [1]–[16].
The model or category recalled by the MODEL button can be
specied for each bank.
* Up to eight can be specied for each button (BANK).

Roland JUPITER-X Specifications

Power

power supply	AC 117–240 V, 50/60 Hz
power consumption	20W

Sound and Effects

preset tones	4, 000 or greater
user tones	256
drum kits	90 or greater

Connectivity

bluetooth profile support	A2DP, GATT
headphones jacks	Stereo miniature phone type, Stereo 1/4-inch phone type
main out jacks	1/4-inch phone type, XLR type

Weight and Dimensions

width	1, 090 mm
depth	447 mm
height	119 mm
weight	16.9 kg