Procedure
1. Open the Utility window.
P. 10Opening the Utility Window/Exiting Utility
2. On the [Option] tab, click [Head Wash].
Proceed with the work by following the on-screen instructions. Do not switch off the power until
the work is completed.
3. Move the machine as soon as possible.
4. Immediately reinstall the machine and fill with ink.
Refer to "Installation and Initial Settings" and promptly fill the machine with ink.
Important notes on moving
• Once the preparations for moving are complete, move the machine and fill it with ink with as little delay
as possible. Leaving the machine alone without ink may damage the print heads.
• When moving the machine, keep it at a temperature of 5˚C to 40˚C (41˚F to 104˚F) and at a humidity of
20%RH to 80%RH (with no condensation). Failure to do so may result in malfunction.
• Handle the machine with care when moving it, keeping it level (not tilted at an angle) and preventing it
from striking other objects.
IMPORTANT
Procedures from Preparing to Move to Reinstal-
lation
Operations When Moving the Unit 117
To Next Page
Loading...
