Roland VersaSTUDIO - Handling Messages and Error Messages

Handling Messages and Error
Messages
Messages ............................................................................................... 108
[XX ink : Shake the cartridge well] ........................................................ 108
[The Waste cartridge is full.] ............................................................... 108
[Replace the wiper.] .......................................................................... 108
[Replace the felt wiper.]..................................................................... 108
[The connection to the printer has been released.]................................... 108
[Clean the printer manually.]............................................................... 108
Error Messages ........................................................................................ 110
[The pinch roller position is incorrect.] .................................................. 110
[Crop marks could not be printed. Output will be canceled.] ....................... 110
[Crop mark detection could not be started.]/[Crop marks were not found.
Output will be canceled.] ............................................................. 110
[The operation has been stopped to prevent the print heads from drying
out. Turn the printer off.] ............................................................ 111
[Motor error] ................................................................................... 111
[Waste cartridge is estimated to be full] ................................................. 111
[Temperature error] .......................................................................... 111
[Cover open error.] ........................................................................... 111
[Sheet setup error] ........................................................................... 111
[Data error]..................................................................................... 112
[Ink has run out.].............................................................................. 112
[Pinch lever was returned.]................................................................. 112
[No sheet is present.] ........................................................................ 112
[Printing cannot continue because the end of the sheet was detected.
Printing will be canceled.] ............................................................ 112
[ServiceCall No**] ............................................................................. 112
[Ink Cartridge error : *** ink cartridge ].................................................. 112
[BN-20D Utility is already running.] ....................................................... 113
[The cleaning liquid cartridge is empty. Replace the cleaning liquid car-
tridge with a new one.]................................................................ 113
Handling Messages and Error Messages
107