Cautionary Notes on Making Output with Cutting
Points to Note When Cutting Only
For roll media, let the media hang down to the rear before outputting.
When using roll media and only performing cutting, let the media hang down to the rear of the machine.
This prevents motor errors and the roll falling from the machine due to the media being pulled with exces-
sive force.
When you are performing printing and cutting, allow the ink to dry sufficiently before starting cut-
ting.
You can set the time for the printer to wait before cutting (Dry Time) with VersaWorks. The drying time
varies according to the media.
RELATED LINKS
・ P. 54Setting the Dry Time
Cutting / Printing and Cutting
46 Optimizing the Output Quality
To Next Page
Loading...
