Do the media strike some other object?
Make sure the media do not touch anything else. This may affect output, even when feed appears to be
smoothly.
RELATED LINKS
・ P. 20Loading Media
Is the media too thick?
Media that is too thick may not only cause unstable feed, but may scrape the print heads, resulting in mal-
function. Never use such media.
Are the grit rollers dirty?
Check to make sure the grit rollers are free of buildup of foreign material such as media scraps.
RELATED LINKS
・ P. 64Cleaning
Media Feed Is Not Smooth
Media Feed Problems 97
To Next Page
Loading...
