Replacing the Blade
If the blade becomes dull, if the edge of the blade is chipped, or if the cutting quality is lowered, replace
the blade with a new blade.
Be sure to perform operations as specified by the instructions, and never touch any area not
specified in the instructions.
Sudden movement of the machine may cause injury.
WARNING
Never touch the tip of the knife.
Doing so may result in injury. The cutting performance of the blade will also be impaired.
CAUTION
Procedure
1. Open the Utility window.
P. 10Opening the Utility Window/Exiting Utility
2. On the [Replace Tools] tab, click [Replace Tools].
When the screen shown in the figure appears, open the front cover and replace the blade.
3. Remove the blade holder.
Replacing Parts for Maintenance
76 Replacing Consumable Parts
To Next Page
Loading...
