Replacing the Felt Wiper
The felt wiper is a component that is used for cleaning the print heads. When the message appears on the
Utility icon in the computer's notification area, it is time to replace the wiper with a new one. Replace
with new items. For information about purchasing felt wipers, contact your authorized dealer.
When the warning alarm sounds during felt wiper replacement
To prevent the print heads from drying out, an alarm sounds about 30 minutes after the start of the operation. Perform
the operation by following the message displayed in the Utility window.
IMPORTANT
Be sure to perform operations as specified by the instructions, and never touch any area not
specified in the instructions.
Sudden movement of the machine may cause injury.
WARNING
Procedure
1. Open the Utility window.
P. 10Opening the Utility Window/Exiting Utility
2. On the [Replace Tools] tab, click [Replace Felt Wiper].
A procedure for replacing the felt wiper is displayed. Carefully read the on-screen instructions and
carry out the work.
Replacing Parts for Maintenance
Replacing Consumable Parts 81
To Next Page
Loading...
