Step 3: Printing Tests and Normal Cleaning
Procedure
1. Open the Utility window.
P. 10Opening the Utility Window/Exiting Utility
2. Click [Check Nozzle Condition].
3. Click [Test Print].
A test pattern is printed. Follow the on-screen instructions to check for nozzle drop-out.
• Nozzle drop-out is present. -> Proceed to step 4.
• No nozzle drop-out is present. -> Click [Close] to finish the procedure.
4. Select the [Normal Cleaning], and then click [Go].
Normal cleaning starts.
Printing
Basic Operations 29
To Next Page
Loading...
