Adjusting Cropping and Cutting
Depending on the composition of the media, the positioning of printing and cutting may be misaligned
even when you are using crop marks. Make corrections for misaligned printing and cutting for the media
you are using.
When making these adjustments, use adhesive media that can be cut.
MEMO
Procedure
1. Open the Utility window.
P. 10Opening the Utility Window/Exiting Utility
2. Click [CropCut Adjustment].
3. Click [Print and Cut Pattern].
A test pattern is printed.
Performing Printing and Cutting Separately
Optimizing the Output Quality 47
To Next Page
Loading...
