Creating Data for Cutting/Printing and Cutting
Verified application software for creating drawings
• Adobe Illustrator CC 2015 or later
• CorelDraw X7 or later
Procedure
1. Create the printing data using application software for creating drawings.
For details on the basic operations of this application software, refer to its documentation.
2. Add cutting lines to the printing data to create the cutting data.
For details on how to create cutting data, refer to [Performing cutting]>[Creating cutting data] in
the [VersaWorks Help].
RELATED LINKS
・ VersaWorks Help
Cutting / Printing and Cutting
Optimizing the Output Quality 45
To Next Page
Loading...
