Is the power switched on?
Switch on the printer's main power, then press the [POWER] key and make sure the key lights up.
Does the [POWER] key stay steadily lighted?
Output is not performed when [POWER] key does not stay steadily lighted. After the media is loaded, pull
the loading lever.
Is the [POWER] key flashing?
When the [POWER] key flashes, no operation except for canceling output is accepted.
Is the cover open?
Close front cover, and maintenance cover.
Has ink run out?
If you send the output data in a state where there is no ink left, a warning buzzer will sound and the ma-
chine will stop temporality. A message indicating that ink has run out is displayed in the Status field of
Utilities. When the ink cartridge is replaced with a new one, printing or cutting starts.
RELATED LINKS
・ P. 61How to Replace the Ink Cartridge
・ P. 110Error Messages
Is a message displayed on the Utility icon in the task tray or in the Utility win-
dow?
RELATED LINKS
・ P. 108Messages
・ P. 110Error Messages
Are the cables connected?
Connect the cables securely.
RELATED LINKS
・ BN-20D Installation Guide
The Printer Unit Doesn't Run
Machine Problems 101
To Next Page
Loading...
