System Configuration of This Machine
"VersaWorks 6" is written as "VersaWorks" in this manual.
System configuration
The following combination of devices and software can be used to generate output.
• Commercially available application software + VersaWorks + BN-20D driver
Commercially available ap-
plication software
Verified application software
• Adobe Illustrator CC 2015 or later
• CorelDraw X7 or later
VersaWorks
This is a highly functional software RIP (Raster Image Processor) that can be used to
load printing data and configure diverse printing settings.
For more information, see "VersaWorks Installation Guide."
BN-20D driver
Driver software that is needed to output printing data from a computer to the ma-
chine.
Utility
Software that is needed to operate the machine. The major functions are shown below.
• Display of messages and error messages
• Adjustment function
• Management of ink remaining amount
• Maintenance function
RELATED LINKS
・ P. 10Opening the Utility Window/Exiting Utility
・ VersaWorks Installation Guide
Introduction
Basic Information 9
To Next Page
Loading...
