How to Replace the Ink Cartridge
When ink runs out, a warning beep sounds and printing pauses. Pull out the empty cartridge and insert a
new one. Printing resumes.
The precipitation of the ingredients in the ink disables printing in normal color. So that the ink mixes well, shake each
ink cartridge 50 times (about 20 seconds) horizontally with a stroke length of around 5 cm (1.97 in.) from each end of
the ink cartridge before inserting it.
IMPORTANT
Important notes on replacing cartridges
• Replace the cartridge with an item of identical type and color.
• Insert the cartridge so that the side with the arrow faces up.
• Insert and remove cartridges slowly, one at a time.
• Insert the cartridge firmly, as far as it will go.
• Never mix different types of items.
• Never leave the machine with an ink cartridge removed. The print heads may become clogged.
• Never insert or remove a partially used ink cartridge with undue force.
• Never remove an ink cartridge suddenly while the printer is in operation.
IMPORTANT
Never store ink, cleaning liquid, or discharged fluid in any of the following locations.
• Any location exposed to open flame
WARNING
Checking Ink Levels and Replacing
Introduction 61
To Next Page
Loading...
