Reference Manual
00809-0100-4664, Rev BA
January 2010
Rosemount 8712
E-20
Model 10D1465 and
Model 10D1475 Sensors
(Integral) to 8712
Transmitter
Connect coil drive and electrode cables as shown in Figure E-18.
Figure E-18. Wiring Diagram for
Fischer and Porter Sensor
Model 10D1465 and Model
10D1475 (Integral) and
Rosemount 8712
Table E-16. Fischer and Porter Model 10D1465 and 10D1475 Sensor
Wiring Connections
Rosemount 8712
Fischer and Porter
Model 10D1465 and 10D1475 Sensors
1MR
2 M1
3
17 3
18 1
19 2
2A
2
1
5
6
16
3
CT
M2
M1
MR
Electrode
Connections
Coil Connections
Disconnect
ROSEMOUNT 8712
TRANSMITTER
MODEL 10D1465 AND MODEL
10D1475 SENSORS
This is a pulsed DC magnetic flowmeter.
Do not connect AC power to the sensor
or to terminals 1 and 2 of the
transmitter, or replacement of the
electronics board will be necessary.
To Next Page
Loading...
