Wireless Router RNX-N150RT User Manual
Enable Wireless Radio - The wireless radio of the router can be enabled or disabled to
allow wireless stations access. If enabled, the wireless stations will be able to access the
router; otherwise, wireless stations will not be able to access the router.
Be sure to click the Save button to save your settings on this page.
Note:
1. The operating distance or range of your wireless connection varies significantly based on the
physical placement of the router. For best results, place your router.
Near the center of the area in which your wireless stations will operate.
In an elevated location such as a high shelf.
Away from the potential sources of interference, such as PCs, microwaves, and cordless
phones.
With the Antenna in the upright position.
Away from large metal surfaces.
2. Failure to follow these guidelines can result in significant performance degradation or inability
to wirelessly connect to the router.
4.7.1.5. Wireless Settings in Bridge with AP Mode
If y
ou select Bridge with AP mode in Figure 3-6 or Bridge
with AP mode in Figure 4-3, the
Wireless Settings page will display as Figure 4-25.
- 58 -
To Next Page
Loading...
