Rotax 915 i A SERIES Maintenance Manual

BRP-Rotax
MAINTENANCE MANUAL
FLUID CAPACITIES
General note
ATTENTION
The operation of the engine may be adversely affected if non-approved or conta-
minated fuel, oil or coolant are used. Any mixing of different manufacturers and
types should be avoided. The use of additives may result in damage.
System Overview
System
Fill capacity Details about the operating
fluids
Fuel system
Refer to the relevant specifications
provided by the aircraft
manufacturer.
Refer to the corresponding chap-
ter in the Flight Manual.
Cooling
system
Approx. 1.5 l (0.4 US gal.). Refer to the corresponding chap-
ter in the Operators Manual.
Oil system
MIN mark corresponds to 2.5 l
(0.66 US gal.) and MAX mark cor-
responds to 3.0 l (0.8 US gal.).
Refer to the corresponding chap-
ter in the Operators Manual.
NNOOTTEE
BRP-Rotax can give an approx value on the fill capacity depending on aircraft de-
sign and positions of radiators and tanks. The volume may difference from this
value. Always check the relevant specifications provided by the aircraft
manufacturer.
Effectivity: 915 i A Series
Edition 0/Rev. 0
12–10–00
Page 3
December 01 2017

Rotax 915 i A SERIES Specifications

General

Brand	Rotax
Model	915 i A SERIES
Category	Engine
Language	English