Rotax 915 i A SERIES Maintenance Manual

BRP-Rotax
MAINTENANCE MANUAL
EXCEEDING OF MAX. COOLANT TEMPERATURE
General note
ATTENTION
If the maximum coolant temperature is exceeded, other limits are also often ex-
ceeded, e.g. oil temperature. Please observe the relevant instructions.
NNOOTTEE
Any exceeding of the max. admissible coolant temperature must be entered by
the pilot into the engine log book, stating duration, extent of excess temperature
and pertinent detail.
Figure 5.13: Overview and proceed:
Temperature exceeded briefly
Table 1: Temperature exceeded briefly
Step
Procedure
1 The whole cooling system must be inspected, repaired or overhauled in ac-
cordance with the BRP-Rotax instructions for continued airworthiness.
Effectivity: 915 i A Series
Edition 0/Rev. 0
05–50–00
Page 19
December 01 2017

Rotax 915 i A SERIES Specifications

General

Brand	Rotax
Model	915 i A SERIES
Category	Engine
Language	English