Rotax 915 i A SERIES Maintenance Manual

BRP-Rotax
MAINTENANCE MANUAL
TIME LIMIT FOR THE COOLANT
General note Coolant must be replaced as per manufacturers instructions, at the latest during overhaul
or when the engine is replaced.
ANNUAL INSPECTION
General note A 100 hr. inspection is to be carried out periodically after every 100 hours of operation or
every 12 months,, whichever comes first.
See Chapter 05-20-00 section Scheduled maintenance checks.
05–10–00
Page 6
December 01 2017
Effectivity: 915 i A Series
Edition 0/Rev. 0

Rotax 915 i A SERIES Specifications

General

Brand	Rotax
Model	915 i A SERIES
Category	Engine
Language	English