Rotax 915 i A SERIES Maintenance Manual

BRP-Rotax
MAINTENANCE MANUAL
Chapter: 05–20–00
SCHEDULED MAINTENANCE CHECKS
TOPICS IN THIS CHAPTER
Scheduled maintenance checks ..............................................................................................................2
Unscheduled maintenance checks..........................................................................................................3
Visual inspection.....................................................................................................................................4
Maintenance schedule procedures (maintenance check list) ..................................................................5
Check List/Maintenance Schedule...........................................................................................................6
Maintenance Schedule ............................................................................................................................8
Introduction The owner and/or user is primarily responsible for the maintenance and airworthiness of
the engine. This includes compliance with all applicable airworthiness directives.
This inspection protocol is not intended to be all-inclusive, for no such protocol can
replace the knowledge and experience of a certified aircraft mechanic. As the party
primarily responsible for the maintenance and airworthiness of the engine, the owner or
user should only have the maintenance work carried out by qualified engineers
(corresponding to the iRMT levels).
Documentation
required
It is the responsibility of the owner and/or user to make sure that the aircraft mechanic
performing the work on the engine has access to the previous Inspection Protocols and
any other required documents.
Effectivity: 915 i A Series
Edition 0/Rev. 0
05–20–00
Page 1
December 01 2017

Rotax 915 i A SERIES Specifications

General

Brand	Rotax
Model	915 i A SERIES
Category	Engine
Language	English