Rotax 915 i A SERIES Maintenance Manual

BRP-Rotax
MAINTENANCE MANUAL
Before every installation, the spark plug thread and the spark plug seat at the cylinder
head should be cleaned (e.g. to remove residue of heat conduction compound).
Installation
ATTENTION
Always replace both spark plugs of a cylinder and do not interchange spark
plugs between cylinders.
ATTENTION
Heat conduction compound at the ground electrode or the head area can lead to
ignition problems. Apply heat conduction compound sparingly and do not apply
to the first three threads.
Apply small amount of heat conduction compound to spark plug thread and tighten spark
plug to 16 Nm (142 in. lb) on the cold engine.
FUSE UNIT (FUSE BOX)
General note Check plug connections and fuse plugs.
Effectivity: 915 i A Series
Edition 0/Rev. 0
12–20–00
Page 43
December 01 2017

Rotax 915 i A SERIES Specifications

General

Brand	Rotax
Model	915 i A SERIES
Category	Engine
Language	English