BRP-Rotax
MAINTENANCE MANUAL
MAINTENANCE CONCEPT
General note The maintenance functions detailed in this Manual are divided into two categories:
• Maintenance I (Line Maintenance)
• Maintenance II (Heavy Maintenance)
Repairs beyond the levels detailed in this Manual are not recommended as maintenance
functions and must be conducted by an authorized overhaul facility.
Maintenance I
(Line
Maintenance)
Chapter 00,05 and 12
The scope of line maintenance consists of removal, installation and adjustment of engine
components (including part wear). All procedures in this Manual are to be considered line
maintenance.
NNOOTTEE
Where applicable, you will be referred to the Heavy Maintenance Manual for work
above and beyond line maintenance.
Maintenance II
(Heavy
Maintenance)
Separate Manual.
Maintenance Manual II details removal, installation and repair of components or parts nor-
mally considered beyond the scope of the "Line Maintenance".
NNOOTTEE
This Manual can only be used in combination with Maintenance Manual I (Line
Maintenance), as it builds up on it.
00–00–00
Page 12
December 01 2017
Effectivity: 915 i A Series
Edition 0/Rev. 0