Rotax 915 i A SERIES Maintenance Manual

BRP-Rotax
MAINTENANCE MANUAL
ENGINE MANAGEMENT ECU
Safety notice
m WARNING
Non-compliance can result in serious injuries or death!
When working on the ECU, the general safety instruction must be observed. See chap-
ter „INTRO“.
Figure 7.4: Engine management ECU
1 ECU 2
Grounding clip
3 Socket for APM-connector
CHECKING ECU
Instruction For checking proceed as follows:
Step
Procedure
1 Inspect the ECU (1) and ECU mounts (2) for secure attachment and
damage.
2
Inspect the ECU wiring for wear, chafing and other damage, and make sure
that the connectors are securely attached.
READ OUT THE ECU DATA MEMORY
Instruction For read out the ECU data memory proceed as follows:
Effectivity: 915 i A Series
Edition 0/Rev. 0
12–20–00
Page 11
December 01 2017

Rotax 915 i A SERIES Specifications

General

Brand	Rotax
Model	915 i A SERIES
Category	Engine
Language	English