Rotax 915 i A SERIES - Installation of the Magnetic Plug

BRP-Rotax
MAINTENANCE MANUAL
Figure 7.17: Overview TYPICAL
INSTALLATION OF THE MAGNETIC PLUG
Install The following steps are necessary:
Step
Procedure
1 Clean the magnetic plug.
2
Install the magnetic plug. Tightening torque 25 Nm (18 ft lb.)
3
Secure with safety wire.
Inspect all system for correct function. Detailed inspection of affected engine components.
12–20–00
Page 38
December 01 2017
Effectivity: 915 i A Series
Edition 0/Rev. 0