Rotax 915 i A SERIES Maintenance Manual

BRP-Rotax
MAINTENANCE MANUAL
VISUAL INSPECTION
General note The scope of a visual inspection generally includes, but is not necessarily limited to, the
following.
Moving parts Normal operating condition, accurate alignment, leak-tightness, cleanliness, ease of
movement, adjustment, mechanical stress, travel, catching, extreme wear, cracks, corro-
sion, deformation and other visually evident damage.
Parts Secure seating, surface condition, cleanliness, deformation, cracks in welding seams or
due to material fatigue or stress, corrosion and other visually evident damage.
Fuel-, Air- and Oil
lines and Hoses
Cracks, dents, kinks, required flexibility, collapsed lines/hoses, abrasion, cleanliness, se-
cure seating and other visually evident damage.
Wiring General cleanliness; loose, corroded or broken terminals; chafed, broken or worn insula-
tion; secure seating, heat damage and other visually evident damage.
Screws and Nuts Surface damage, secure seating, locking wire, securing paint and other visually evident
damage.
Filter and
Screens
Filters and screens must be inspected for contamination and potential blockages, cleaned
and replaced as required.
05–20–00
Page 4
December 01 2017
Effectivity: 915 i A Series
Edition 0/Rev. 0

Rotax 915 i A SERIES Specifications

General

Brand	Rotax
Model	915 i A SERIES
Category	Engine
Language	English