Rotax 915 i A SERIES - Page 120

BRP-Rotax
MAINTENANCE MANUAL
Step
Procedure
1
Connect the decoding unit (Dongle) with ECU data cable to the computer.
2
Select the menu item BUDS in the maintenance software and print out the
report.
NNOOTTEE
Connect and disconnect the B.U.D.S. USB-to-CAN Converter only if ECU is OFF.
Non-compliance leads to entries in the error / event memory of the ECU.
12–20–00
Page 12
December 01 2017
Effectivity: 915 i A Series
Edition 0/Rev. 0