BRP-Rotax
MAINTENANCE MANUAL
Engine test run An engine test run is necessary:
Step
Procedure
1
Check the oil level and top up with oil as required.
2
Operate the engine until the temperatures have stabilized for a period of 5
min. (engine oil temperature between 50 to 70 °C (122 - 160 °F).
3
Switch the engine OFF.
4 Allow the engine to cool down.
5
Check for leaks.
Effectivity: 915 i A Series
Edition 0/Rev. 0
12–10–00
Page 9
December 01 2017
To Next Page
Loading...
