SAGEMCOM F@ST 4310 User Manual

5- Information / Configuration
F@ST 4310 Reference Manual Page 5-69
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
Field State
Class Name Traffic Class Name.
Order Sequence number.
Classification Criteria
Class Intf Class Interface (Local, eth0, wl0).
Ether Type Nature of the LAN port.
SrcMAC/Mask "Source" MAC address (your computer, for example) and associated
subnet mask.
DstMAC/Mask "Destination" MAC address (a machine on the Internet, for example)
and associated subnet mask.
SrcIP/Prefixlength "Source" address (your computer, for example) and associated subnet
mask.
DstIP/Prefixlength "Destination" address (a machine on the Internet, for example) and
associated subnet mask.
Proto Protocol used.
Src Port "Source" port.
Dst Port "Destination" port.
DSCP Check Differentiated Services Code Point, priority value from Default to CS7.
802.1P Check Priority field 802.1P (value between 0 and 7).
Classification Results
Queue Key Queue number, allocated by the system according to the selected
precedence.
DSCP Mark DSCP priority (from Default to CS7).
802.1P Mark Priority field 802.1P (value between 0 and 7).
Enable QoS enabled or disabled for this traffic class.
Note: This status can be amended starting from this window.
Remove Check this box and click on the [Remove] button to remove the
selected object from the list.

SAGEMCOM F@ST 4310 Specifications

General

Brand	SAGEMCOM
Model	F@ST 4310
Category	Network Router
Language	English