SAGEMCOM F@ST 4310 - Page 103

5- Information / Configuration
F@ST 4310 Reference Manual Page 5-71
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
Ether Type
Select from the scroll down list:
• IP
• ARP
• IPv6
• PPPoE_DISC
• PPPoE_SES
• 8865
• 8866
• 8021Q
Source MAC
Address
Enter a "Source" MAC address.
Source MAC Mask Enter a "Source" MAC mask.
Destination MAC
Address
Enter a "Destination" MAC address.
Destination MAC
Mask
Enter a "Destination" MAC mask.
Specify Class
Queue
Select from the scroll down list:
• Blank
• Number: Priority number and associated queue number, defined by the
system starting from the "Queue Precedence" (see subsection 5.7.8.1).
Mark Differentiated
Service Code Point
(DSCP)
Select the type of Differentiated Services Code Point (DSCP) mark to be
allocated (6-bit coding) from the scroll down list.
Default to CS7: 000000 to 111000
Mark 802.1p priority Select Blank or a priority value between 0 and 7 from the scroll down list.
Tag VLAN ID
[0-4094]
Enter a value from 0 to 4094.
Field Action