5- Information / Configuration
F@ST 4310 Reference Manual Page 5-103
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
WPA2
Object: This encryption mode applies the functionalities of the WPA2 protocol and requires the use of a
"RADIUS" authentication server.
• Select the WPA2 security from the scroll down list; the following screen appears:
WPA/WAPI
Encryption
Select the WPA encryption required from the scroll
down list:
• TKIP (Temporal Key Integration Protocol)
• AES (Advanced Encryption Standard)
• TKIP + AES
TKIP
WEP Encryption
Select from the scroll down list:
• Disabled to use WPA encryption only.
• Enabled to use both WPA and WEP encryption.
Disabled
Field Action/Meaning
Default
value
Re-auth Interval
Enter a value (in seconds) which determines the period
after which the WPA key will be certified.
36000
WPA Group Rekey
Interval
Enter a value (in seconds) which determines the period
after which the WPA key will be regenerated
(Renewing) in broadcast / multicast (LAN broadcast).
0
RADIUS Server IP
Address
Enter the IP address of the "RADIUS" authentication
server.
0.0.0.0
RADIUS Port
Enter the port used by the "RADIUS" authentication
server.
1812
Field Action/Meaning
Default
value