SAGEMCOM F@ST 4310 User Manual

5- Information / Configuration
Page 5-24 F@ST 4310 Reference Manual
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
5.7.2.1 Add
• Click on the Add button.
• Select the DSL ATM interface for the WAN service.
• Click on the Next button to continue configuring the WAN service.
Note
You must have configured a DSL ATM interface (see section 5.7.1) to add a WAN
service.
Note
Depending on the type of network protocol configured for the selected DSL ATM
interface (EoA, PPPoA or IPoA), the content of the following WAN interface
configuration screens differs.
Therefore, and for more clarity, each type of protocol will be dealt with separately
(screens + associated summary tables) below.

SAGEMCOM F@ST 4310 Specifications

General

Brand	SAGEMCOM
Model	F@ST 4310
Category	Network Router
Language	English