SAGEMCOM F@ST 4310 User Manual

5- Information / Configuration
F@ST 4310 Reference Manual Page 5-25
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
5.7.2.2 Ethernet over ATM – PPP over Ethernet (PPPoE)
• Select the WAN service type PPP over Ethernet (PPPoE).
Field Action Default value
Enter Service
Description
Displays the name of the service being configured. This
name, which is allocated automatically, is made up as
follows: Protocol_VPI_ Index _ VCI
For example: pppoe_eth0.
Note: You may enter another service name.
pppoe_eth0
Enter 802.1P Priority
a
a. These values only appear if the WAN service is configured over a DSL ATM interface using VLAN MUX
Mode.
Enter a value for the 802.1P Priority. This value is
between 0 and 7.
-1
Enter 802.1Q VLAN ID
a.
Enter a value for the 802.1QVLAN ID. This value is
between 0 and 4094.
-1

SAGEMCOM F@ST 4310 Specifications

General

Brand	SAGEMCOM
Model	F@ST 4310
Category	Network Router
Language	English