5- Information / Configuration
F@ST 4310 Reference Manual Page 5-55
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
A few rules for entering values:
• When you want to select a single port, the start port (Trigger Port Start or Open Port Start) and the end
port (Trigger Port End or Open Port End) must be identical.
• When you want to select a range of ports, the start port number must be lower than the end port number.
The following diagram contains an example:
Using the "Trigger" 3568 port (WAN side), the "Delta Force" service server triggers the opening of port range
3100 to 3999 for your computer to access this service.
To Next Page
Loading...
