PLC Wireless Router F@st Plug 502W
- 15 -
Step 5 Ping the default IP address of the PLC wireless router, to check whether the current
connection between your PC and the PLC wireless router is normal.
Choose Start > Run from the desktop and enter ping 192.168.1.1.
See the following figure:
Note
192.168.1.1 in the ping command is the default IP address of the LAN interface. If
the IP address changes, enter the current IP address instead.
Step 6 If your PC can ping through the default IP address of the PLC wireless router, the
following page appears, indicating that the connection between your PC and the
PLC wireless router is normal:
To Next Page
Loading...
